Hot tub maintenance tips? Here are several advices about how to maintain your hot tub and also a suggestion if you live in Colorado. Always shower first with soap and water to reduce the likelihood of contaminating the spa water and minimizing health risks. Lotions, oils, and other things contribute to build-up in your spa. In cold climates, it’s not advisable to drain it — so save yourself the extra cost of a possible repair bill by rinsing off before and after. Besides: isn’t it nice to get into a really clean tub? Limit your soak time to no more than 15 to 20 minutes at a time. Cool off, then re-enter if you like.
The most important step is to sanitize the water. The most popular way to do this is with chlorine or bromine based chemical, usually in a slow dissolving tablet form. There are several alternative sanitizing agents such as ozone, silver ions, copper ions, and enzymes but use these with caution since most are not effective without additional chlorine or bromine agents.
Want to keep body oils, hair products, lotions, and other goop from entering your spa’s filter? Drop a few tennis balls into your spa’s skimmers, or even directly into the water. Your fuzzy, yellow friends will soak up the bad stuff in their fibers and make it easier to keep your spa looking, and feeling, clean and healthy. For best results, change them regularly, especially if you use your tub frequently or have a lot of people using the tub at once.
Advices for buying a hot tub : Reclined seating lets you lay back, fully submerged in spa water. Loungers usually have more jets for a full-body massage. The best spas are deep enough to prevent you from floating out of the lounger. A lounge takes the equivalent space of up two standard seats. Tubs for families or friends the need more seats could skip the lounger for an extra spot.
But first let’s see the hot tub choice of the month : Master Spas has a good variety of spas categorized into the entry- and mid-level price ranges, making this brand a good value option. The brand has 21 hot tub models, 13 of which fall into the entry- and mid-level price ranges, and all of which are made in the U.S. These spas span all sizes and represent four product lines: Clarity, Healthy living, Twilight and the Michael Phelps Legend series. Master Spas offers several premium features standard in all models, including waterfalls and a unique bio-magnetic therapy system. This brand also has the best upgrade options, including both UV-C and ozone sanitation options, a Wi-Fi module and Bluetooth audio. However, the customization options and shell colors were less extensive than other brands. Find more details at Complete Hot Tub repair services on all makes and models in Colorado.
Tap water is pretty good spa water in most areas. But in some areas (and you know where you are), you can run into issues of soft or hard water, high alkalinity, pH imbalance, or high levels of chloramines, metals and minerals. You can test your tap water with your test kit, or when testing after a drain and refill, you can measure the suitability of your tap water as spa water. Using a spa pre-filter removes metals, odors and the finest silt from your spa fill water.
One of the most important things you can do to increase the longevity of your spa cover is to remove it at least twice per week. Use a spa cover lifter to completely remove it, or if you don’t have a spa cover lift, gently place it off the spa. Give your cover a few hours to breathe and shake off some of the constant heat and moisture. This is also a good time to add chemicals or shock the spa if you aren’t using it at the time.
Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.