Downlight factory 2023: How to choose LED landscape lighting? Before buying LED outdoor landscape lighting, there are some essential things to take into consideration. The first thing to consider is how much light you need? You can choose from spotlights, floodlights, or wall packs. There are different wattages available depending on the size of your place. Another thing to consider is the kind of light that you need. As there are three types of lighting fixtures, you can choose from fully shielded, partially shielded, and non-shielded lighting fixtures. Before buying LED landscape lighting, you also need to consider the lumens per watt rating. This reading will tell you how much light is being put out by a fixture. A lower number means that the fixture emits more lumens, while a higher number indicates fewer lumens emitted from that fixture. See more info at ip65 surface mounted downlight.
What is Magnetic Track Lighting, and how does it work? The magnetic track light is a kind of light fixture installed on the track by the magnet on the light fixture. The track is composed of an aluminum shell, copper conductor, and iron sheet. When the luminaire with magnet is close to the iron sheet in the track, the luminaire will be adsorbed on the trail without any tools, and at the same time the luminaire is in contact with the copper conductor, then powered by an AC110-220V to DC48V transformer for the whole track lighting system.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
Smart flood lights: It is including motion sensor, photocell, time control floodlight fixtures, most of them can be turned on/off automatically through some special setup. RGB led flood light: This is color changing or special color such as green, blue, red, yellow types for special application. Solar powered led flood lights: It is the most energy-saving type of floodlight, and it powers the floodlight by converting solar energy into electrical energy. Very suitable for use in countries or regions with sufficient sunlight, such as Africa, the Philippines, Indonesia, Brazil and other places.
How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.
High lumens. most of them are about 100lm/W output. Even it can be up to 150lm/W output for best outdoor flood lights in markets, saving much more 80% energy than traditional halogen flood lights or HPS floodlights. Longer lifespan. The service life of LED reflector light is at least twice as long as that of a traditional projection lamp, which can reach 50000hrs. The outdoor led projection light produced in 2013 is still in normal operation, and its service life has exceeded 7 years. Competitive Price: Most of the led lights, especially led street light, led flood lights, led high bay, downlights, and track lighting is much more competitive in price than other suppliers.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
Safety: Solar-powered street lights provide a safe and secure environment for pedestrians and drivers. What is the voltage of solar street light? The voltage of solar street lights can vary depending on the type of light and the size of the solar panel. Generally, the voltage of a solar street lamp is between 6V and 24V, the main one is a 3.2V system and a 12.8V system for solar-powered street lights with LiFoPo4 battery, and an 11.1V system for Li-battery.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Discover additional details at https://grnled.com/.
GRNLED brand from greenriy Technology Co., Ltd ( another brand is Golumen) was founded in 2014, is one of the leading LED light manufacturers, factories & suppliers in China, accepting OEM, ODM, and SKD orders. We have rich experience in production & research development for led light types. For our long-term customers, we also provide services to help them to purchase any products in China if needed. All of the things we can deal with, including looking for suppliers, doing a quality inspection, arranging shipping, etc. What we do is that our customers only need to sell led lights, the other things all we bear.