Welding curtains shopping IE right now? The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.

Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient.

The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc. Find additional details at MIG welders Ireland.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

The Forney Easy Weld 140 FC-i is a great MIG welder for home use. The “FC-i” in the name means “Flux Core inverter.” Inverter technology is lighter than traditional transformers used in most welders, meaning this welder delivers 140 amps even though it only weighs 19 pounds. The one thing this welder doesn’t offer is true MIG capability. Flux core wire doesn’t deliver the same clean, indestructible level of welding as a gas-shielded arc. It provides shielding by evaporating flux. For the average home welder, the difference is minor. However, if you need to weld aluminum or stainless steel, flux core wire isn’t up to it and you’ll need to find a MIG-capable machine. The 140-amp rating is about as hot as you can get without stepping up to 220 volts. That’s enough to weld 1/4-inch steel. The duty rating on this machine is 30 percent at 90 amps, pretty astounding on a machine in this price range. There’s probably not a MIG welder in this class that has more satisfied customers, a big reason it’s the Weld Guru Weekend Warrior selection for Best MIG. If you don’t have a lot to spend, then I would recommend taking a look at our cheap MIG welders for under $500 guide.

A few tips on welding equipment, MIG and TIG welders, plasma cutters. When appearance counts, TIG welding creates a high quality, clean weld that is far less likely to distort the metal by using a nonconsumable tungsten electrode. There is no need to worry about splatter because it only uses the necessary amount of filler metal needed in the welding puddle, making for the highest quality weld in every respect. However, TIG is fairly specialized and requires a good deal of training in order to master it—so make sure any TIG welder purchase is paired with a plan to take welding classes. Instead of the point and shoot simplicity of MIG welding, TIG requires the use of a foot pedal to regulate the welding process. A filler rod that is separate from the torch that must be fed in gradually. Many professional welders prefer TIG because it can weld a wide variety of metals and because of the versatility of argon gas used during TIG welding. There is no slag to block the view of the weld puddle. Argon gas can weld any metal at any thickness with TIG welding, and therefore there is no need to change the gas depending on the project.

If you know that your new machine comes with a 2-year warranty, it can take a lot of the stress off your shoulders if your device suddenly stops working. If you can’t find a MIG welder with an appropriate warranty and the right features, it’s often a good idea to choose something that has spare parts which are easy to find. Try not to buy anything that’s made outside of the UK. The price range may be more affordable but the parts would be harder to source. Look for a spool gun so you can weld aluminium. If you plan on using your home welder to weld aluminium, then you’ll need a standard spool gun. Aluminium can quickly become damaged and tangled with a typical welding wire feed spool, so a spool gun will ensure that you can get the best results from your DIY work. Find more info at weldingsuppliesdirect.ie.

The Lincoln X-Tractor Mini weld fume extractor has a 99.7% efficiency in removing welding fumes. It’s adequate for keeping your house or store fresh. 80 dBA sounds that it generates are close to nothing comparing with other fume extractors. Despite being a mini portable fume extractor, the X-Tractor Mini has versatile usability. It can be used for flux-cored welding, MIG and TIG welding, and stick welding. This portable weld fume extractor from PACE is ideal for benchtop soldering and electronic rework. The low-cost Arm-Evac 150 System includes everything you’d find in the best portable welding fume extractor. 3-stage filtration system adds immense value to its overall efficiency.

If value for money is a priority to you, take a look at this drill from Evolution. It is a solid and durable drill that will get the job done for the professional steelworker as well as the weekend handyman. This drill has a 6-inch stroke length and comes with a 0.5-inch chuck and key. The drilling range has a diameter from 7/16? to 1-1/8? and cutting depth of 2 inches unless you change out the chuck to something else. You can place the feeding handle on either side of the drill, depending on what is comfortable to you. The heavy-duty magnet makes it easy to do overhead or horizontal drilling. An integrated cooling system will keep your magnetic drill press from overheating. There are some drawbacks to this drill. It can only turn at the speed of 570 RPM. This works great for when you are drilling steel or aluminum, but this speed is too high for drilling titanium or stainless steel. This drill may also be more primitive than conventional high-end magnetic drill presses.

The story of ESAB is the story of welding. When our founder Oscar Kjellberg developed the world’s first coated welding electrode in 1904, he launched a company whose innovation and uncompromising standards have helped create the history of welding itself. For more than 100 years, ESAB has been powered by the will to continuously seek new and improved ways of serving our customers. This has made ESAB a world leader in welding products and advanced cutting systems. In 2012, ESAB was acquired by Colfax Corporation, one of the world’s leading diversified industrial manufacturing companies. Colfax, like ESAB, is a solidly customer-focused company that places strong emphasis on constant innovation and improvement. From the firsts by our founder to our global growth, we take pride in what we’ve accomplished in more than a century. But we do so with a keen eye on the future. What can we do better? It’s only when we seek to build upon all we’ve learned, to perfect the innovations our customers count on to work confidently, and push ourselves and our company further that we can boldly face the future. This is how we continue to write the history of welding and cutting. At the end of the day, it’s not where you’ve been that matters most – it’s where you’re going. And for us, that’s forward.

GPPH’s tables offer an incredibly stable and sturdy construction. The table top is made from 15MM thick material, this is outstanding when compared to the typical 6MM – 10MM that is usually used on lower end welding tables. In addition to this, the steel used is S355J2+N grade that is carefully selected. The steel is also unpickled so as to prevent the material becoming bright and causing arc to flash bounce off the table making the working conditions difficult for the welder. Finally, the tables are not coated with paint as it can make the surface difficult to conduct. They are coated with an oil based preparation which protects the tables during transport. Anti spatter is suggested.

The Hobart Handler 230 is unmatched in its field. It’s a powerful welder that can comfortably weld 1/2 inch steel in single phase with fantastic arc quality. Other features include a 60% duty cycle at 175A, 12 different voltage settings, and infinite wire speed control. It’s a huge unit, but there’s wheels to help move it around, and a build in cylinder rack to store your gas cylinder. Most hobbyists won’t need a welder this powerful, but if you want a reliable MIG welder with a bit of extra power, this is our top pick. You can read the full review here.

Use the Personal Protective Equipment (PPE): It is mandatory to use various appropriate PPE while handling an industrial gas cylinder. For instance, wear safety glasses, safety shoes, gas masks, and safety glasses, while working with cylinders filled with compressed gases. Similarly, it is important to use flame arrestors when using acetylene cylinders in compressed air. Use Regulators Properly While Handling Cylinders: Regulators are devices, which are designed to lower the working pressure of the gas. These devices differ according to gases. Many times, the regulators aren’t handled and stored properly. This improper usage may lead to problems in the long run. Hence, it is important to take several precautions while using regulators.

The people behind Display4top market this particular model as a professional MIG welder and we can’t say that they make a poor case in that regard. For one, its duty cycle is definitely up there. With its 48A rated output, the model is able to work for 6 minutes straight before overheating. It comes equipped with a variable wire speed control trigger, so you’ll be able to efficiently work with different metals. There are two power settings and an Ampere knob, further making the versatility case. More importantly, the model is as durable as they come. The forced air cooling system keeps the temperature at a nice, practical level. On top of that, the welder incorporates a thermal overload protection system that will be able to pick up the former’s slack in case it fails to do its job.

UK market choice: Through our extended research of these particular welders, we found dozens of videos and articles and reviews to guide the viewer through the process of buying, setting up, and using these machines. We hope this buying guide will help you in choosing the welder that most suits your needs. After further explanations of the welding process and what to look for when buying, there will be a list of ten well-known metal inert gas welders that will each be reviewed briefly.