Power press machine manufacturer with pressmachine-world.com? Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits). Discover extra info on world press machine.
In order to choose the lowest onnage specifiction,itis best to plan for a bening radus larger than the thickness of the material, and use the free bending method as much as posible When the bending radius is large, it often does not affect the quality of the finished part and its future use. Bending accuracy requirements are a factor that needs to be carefully considered. It is this factor that determines the need to consider a CNC bending machine or a manual bending machine. If the bending accuracy is required to be ±1 and cannot be changed, the CNC machine must be focused.
Working together for customer success. Since the foundation of the Yinxin world press machine company, one of the foundation principle has been to work closely with our customers. This provides the opportunity to continually assess and improve the levels of service we offer and to create the most innovative products available. World has been committed to the development and production of power press machines since it was established in 1953. More than 100 experienced engineers are working in the three R&D centers, one in Shanghai, one in factory and another one in Ningbo.
When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.
In particular, the resilience stress stat,the flatness and the cuting quality are very important quality characteristics that must be considered for the materials n the staightening and feeding technology. Remarkably, these criteria play a decisive role i te qualit of the final product even befre te final molding. In production, for reasons of cost and time, the aim is to achieve an ever-higher degree of automation, which can only be achieved if the semi-finished products have perect latness, a lowlevel o residual stress. lf these requiremets are not met, this can have a negative effect on handling and further processing or even make it impossible. Discover extra info at https://www.pressmachine-world.com/.