Rotary moulding machine manufacturer with Foodsmachine? Our moulder is various with different shapes for diverse biscuit. For letter biscuit moulder, finger biscuit moulder, hollow panda biscuit moulder. Anyway, our moulder can be customized according to the specific requirements of our customer. As for belt,we use the canvas belt not PU belt, because the canvas belt is beneficial for us to remove the biscuit embryo from the moulder. Its Scraper can be adjusted up and down with different angle; Find additional info on rotary molder. Golden Bake was founded by a biscuit line engineer and a biscuit master in 1999. With a vision to be the most completely automatic biscuit production line system supplier in this field, our team has been extending to 280 employees. Now Golden Bake is the top biscuit machinery manufacturer in China.

Adopting with pneumatic conveying system for transport powder in sealed pipe. Due to the weight measurement method, error less than 1kg. No dead angle in pipe without using screw conveyor. Adopting with pump conveying system for transport liquid in sealed pipe. Due to the weight measurement method, error less than 1kg. Avoid the error caused by the difference of material density and temperature in different batch, we don’t using flow measurement.

Automatic system, automatic soluiton, automatic system post baking. When the biscuits coming from the line depending on line capability are centralized by deducting into definite lines, reversed, aligned and fed automatically by aisle to sandwich machine or coating machine. According to customer’s factory shape can optional with turning conveyor device or cantilever conveyor device. Professional conveyor system can effectively reduce labor costs and increase output.

To get good quality dough the hard dough is usually mixed on vertical dough mixer. Two or three paddle machines are used with high mixing speed, 25rpm. The high but gentle mixing action incorporates the ingredients well without undue work input at the sponge stage. The yeast should be dispersed in water before feeding to the mixing tub. The dough is mixed to a temperature of 30~35C, which is the optimum temperature for the action of the yeast. The sponge is fermented for 12hours at a temperature depends on the biscuit master. During this time the pH value will change from about 5.5 to 4.0 and the temperature of the dough will increase. After the fermentation of the dough, the dough tub is taken back to the mixing room. The additional ingredients for the dough are added, including the sodium bicarbonate. Gentle, slow speed mixing is required until homogeneous dough is made. Over-mixing will reduce the spring and give a hard, tough product. After mixing, the dough is returned to the fermentation room for up to 4 hours. With the addition of soda, a large change in the pH occurs and the dough will reach a pH of over 7.0.

Dough forming machine section is mainly used for forming the dough. Different biscuit uses different forming section. The forming machine used is also different. The forming of hard dough biscuit is much more complicated than soft dough biscuit. Dough shaping machine used is different. Soft dough biscuit forming by the rotary moulder. The dough should be fed very evenly and consistently to the hopper of the rotary moulder, maintaining an even level across the width of the machine during the production. See extra info on https://www.foodsmachine.net/.