Alloy rims manufacturer with Jjjwheel: Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Read extra information at alloy wheels manufacturer.

Flow formed wheel manufacturing process first requires processing the blank with low-pressure casting, then heating the wheel blank, while gradually extruding the final form by rotating the press through the machine. Under the appropriate temperature and pressure of the press, the metal molecules are more dense and fibrous, which can bring higher strength and toughness than low-pressure casting, and the rim after spinning has a thinner cut, so the overall weight of the wheel is reduced. Welcome to inquire about wholesale flow formed wheel price, JWHEEL is the best choice of forged wheels manufacturers.

One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.

Since pure electric vehicles do not need an engine, the design styles of the front hoods of pure electric vehicles can be diversified, and are generally refined and sharp. The design style of “rocket front” is full of sports, and it is very windy on the road. The functional configuration of pure electric vehicles Its strengths, various types of assisted safe driving, are very popular with novice drivers. Now many first-tier cities are gradually implementing limited numbers and licenses. Many people have money to buy cars, but the number 1 license is hard to get, but the green license is not affected. Electric hybrid models, which are the only choice for car owners in many restricted areas.

Low-pressure casting: It is more advanced compared to gravity casting. Although it is also formed by pouring high-temperature liquid metal into the mold and cooling it, the metal molecular density will be higher with the help of constant pressure and the wheel will have higher strength after forming because of the use of low-pressure nitrogen propulsion to accelerate the filling of the mold. The whole process is mechanized, so the level of craftsmanship is stable. This process is usually used for most of the original matching wheels for vehicles today.Jiangjin Wheel is a professional aluminum alloy wheels suppliers,specialized in low pressure casting wheels.

We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Find more info at https://www.jjjwheel.com/.