Book service and vehicle Mot Reading with mot-centre.com? An MOT (Ministry of Transport test) is an annual safety check that ensures your vehicle meets the minimum road safety standards, including regulated exhaust emissions levels put in place by the Driver and Vehicle Standards Agency (DVSA, formally VOSA). During this test, important components of your vehicle will be checked to ensure that they meet the legal standards and that your vehicle is safe to drive. In May 2018, new MOT rules mean any defects will be categorised as either dangerous, major or minor.

The brake system of your car is one of the most important, which is why you need to pay attention to the brake pads. Most owner’s manuals recommend you change the pads every 20,000 miles. However, if you drive your car every day, and have to brake more often, you might have to replace them more often. People who live in the city and have to deal with a lot of traffic and stop more often should consider changing the pads more often. Replacing the brake pads is a fast and relatively inexpensive process.

We give you a 52 point check-list on what work has been Carried out, Brake linings are checked and cleaned and a report is given on their condition, All this from £120.00 plus the cost of parts and + Vat. Parts Can Vary in Cost especially high performance Cars so it is very difficult for us to give you a Fixed price, But our labour rate is a fixed Price especially for Car Servicing in Reading

Keep your records in order, and take them with you. Have records available on everything you do to maintain your car — and keep them in the car if possible. Well-kept records can be instrumental in correctly diagnosing a vehicle problem the first time. Incomplete records can lead to redundant auto repairs that waste your time and money. A vehicle with a well-documented repair service history also tells your mechanic that you value first-rate work at the recommended intervals, and have done your part to keep your vehicle in tip-top shape. Discover more information on Service And Collect My Vehicle.

Any tyre that doesn’t have at least 1.6mm of tread across the middle three-quarters is an instant MoT failure. Tyres with significant damage such as cuts, bulges or cracking will cost you a pass certificate too. All your vehicle’s lights must be clean and work correctly, or you will fail the MoT. So before you book it in, check they do. That means headlamps on full and dipped beam, sidelamps and daytime running lights, hazard lights and indicators, fog lamps if fitted, and even number plate lights at the back. You can pick up most bulbs from car accessory stores, and they’re usually easy to fit – if sometimes a little fiddly.

You can quickly check the tread of your tyres with the help of a 20p coin. Simply take the coin and insert it into the grooves on the tyre. You should not be able to see the outer band of the coin if your tyres are within the legal limit. If you can see that section of the coin, your tyres could be unsafe, so it’s best to get them checked and changed by a professional before your MOT. Much like your mirrors, there are obligatory lights that need to be working on your car for you to pass your MOT: the front- and rear-position lamps. The exact positioning of these required lamps does not form part of the inspection, but it’s best to check that both lamps are approximately the same height and that they’re working, not obstructed and in good condition.

Cars are becoming ever more sophisticated. Unfortunately, this also means that there are more electronic components that could fail. Have you ever taken your car to a garage with a warning light on, only to find they can’t locate the problem? We use the latest diagnostic equipment to find the fault, and then we repair it. From ABS and airbag sensors, to engine management lights and air conditioning, we’re here to help you.

Windscreen wipers: make sure your wipers clean your windscreen effectively along with the washers. Remember, any tears or holes in the wiper rubber can mean an MOT fail. Suspension check: check the shock absorbers by applying your weight to each corner of the car then quickly releasing it. The corner of the car should quickly return to its original position. If it bounces more than twice, this could mean the shock absorbers are faulty and need to be checked. Horn: give a short blast of the horn – if it doesn’t work or isn’t loud enough to attract the attention of pedestrians or other motorists, get it repaired. Read even more info at https://www.mot-centre.com/.