Stainless cable glands and PG threaded cable glands buyer tips? The areas of application of cableglandsonline.com EMC fittings range from machine and plant construction applications to telecommunications and airports up to use in hybrid vehicles – to name only a few. In the automotive sector, they are primarily used in hybrid and electric vehicles, but also in conventional vehicles to protect the sensor and on-board electronics systems from electromagnetic interference.
Ratings and standards: Because cable glands are designed with safety in mind, they come with a rating system to ensure you know what you’re getting. The Ingress Protection Marking (IP) rates the glands depending on their design and efficiency throughout different tasks. These rating often go up to IP68 and IP69K. Any cable glands you buy today will also be covered by the new European standard for Cable Glands, EN50262. It’s important to check that any devices placed in explosive atmospheres comply with national or international codes of practice.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Cleanroom cable glands: Suitable for use in a cleanroom environment with the associated properties of maintaining positive pressure, prevention of dust and fluid ingress, etc. Read extra info at PG Cable Gland.
This feature also facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding.
Why Do We Use Cable Glands? A cable gland (or as sometimes called; a cable fitting) is a mechanical device used to securely attach the end of a cable to an instrument, junction box, or piece of equipment. Cable glands provide many functions: To firmly secure cable entering a piece of equipment, To maintain the ingress protection of the piece of equipment (minimum of IP54 for ‘e’ and ‘n’ type enclosures. Where the enclosure wall thickness is less than 6mm a sealing washer or thread sealant will be required to maintain IP54 protection).
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.