Laser welder shop UK from WeldingSuppliesDirect: You know that it’s important to capture toxic particulate from weld fumes before you can breathe it in. But what if you or your welders are moving around and a stationary unit doesn’t have the reach or coverage for your work? Portable and mobile fume extractors are an excellent solution when factory space is limited, budgets are limited or welding tasks don’t require large fume extraction units. Larger facilities with heavy welding operations might require a more in-depth solution. Extraction hoods could be used for areas where regular welding occurs. If a duct system is not available, other systems might be used such as a diluter system. Find more info on Maxphotonics.

If you are welding on small items, or in a very consistent location all the time, you may want to consider one of our more fixed solutions. Selecting the Right Portable – Portables have gotten a bad name, but we’re trying to fix that. There are a few primary reasons for this, and what we plan to do about them: Application Matching – A major issue is a mismatch in product selection and application. Portables are one of the most affordable fume extraction methods. It is this reason that most people buy them outright without considering whether they are a proper fit for their application demands. Most portables on the market are cheaply made and not welder-friendly. Typical units are small and plastic with limited arm-reach. Therefore, we have made our portables out of thick/durable steel with a higher arm-mount position.

Some of the safety protocol for every welder is to always wear proper flame retardant protection because exposed skin can get burned “like sunburn” from arc, tig, mig welding flash. It is also advisable to wear eye protection and face shield. In this content we will discuss in details the top 10 safety protocol every welder needs to adhere to improve their safety on jobsite. Adequate ventilation and the use of fume extraction systems are crucial in any welding environment. These systems help to remove harmful welding fumes and gases from the workspace, which are hazardous to health when inhaled. Purpose: Proper ventilation ensures that toxic substances are effectively removed from the air, reducing the risk of respiratory problems and other health issues related to air quality.

The overall temperature of the materials will vary depending on the kind of fusion as well. Arc welding, harnessing the power of lightning, produces very high temperatures. Depending on the metals being fused, this temperature can range anywhere from 2,000 to 3,500 Celsius and, in some cases, even higher. Brazing is a lower temperature application and, as it doesn’t melt the base materials, keeps heat just high enough to melt the filler and flux being used. This is generally in the range of 600 degrees C. Soldering needs even less heat. The melting point of solder is generally in the range of 90 to 450 C, and many soldering irons are generally set to the 300–350-degree range.

There’s a 100% guarantee that your head won’t fit in any helmet you try the first time you try it. All too often, helmets end up one-size-fits-all in design, which unfortunately means that one size fits no one. An adjustable helmet will have various tension and position adjustments to make sure the helmet fits comfortably and snugly enough to not move around but not so tight that it becomes painful or distracting. It should also be adjustable up and down to adjust your view. Some welding helmets come with inner liners and headgear that can be adjusted more than the built-in adjustments the helmet itself has. The most advanced helmets have completely replaceable webbing that is both elastic and adjustable; these stretch out over time but can be replaced with a newer iteration, so you don’t have to replace an entire helmet because a little bit of strapping wears out.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.

The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc.

In many shops, the operator has to go to a tool room or supply area for a new contact tip, coil of wire or other welding accessory. This takes valuable time away from the welding cell and slows down overall productivity. To improve the operating efficiency and minimize wasted time, companies should stock at least a limited supply of all necessary items near the welding station – this includes shielding gas, flux and wire. Another helpful productivity enhancing tip is to switch to larger spools of wire such as from 25 lb. spools to 44 or 60 lb. spools to even larger packages of 1,000 lb. reels or 1,000 lb. drums. A simple switch like this means less changeover time, which adds up over the weeks, months and years. Shops should also be on the lookout for shielding gas waste. A simple device called a surge turbine can be placed at the end of the gun to provide a digital readout of the gas surge and flow rate. If the surge rate is high, investing in a surge guard can reduce the pressure, eliminating gas surges and waste. Leaks in the gas delivery system can also create a potential loss of money. By looking at the amount of consumables purchased each year and then examining the total gas purchased, a company can determine if there is a significant loss. Welding manufacturers and distributors should be able to provide average utilization figures so that loss can be detected. If there is a loss suspected, one of the easiest ways to check for leaks is to shut off the gas delivery system over the weekend. Check the level on Friday evening and then again on Monday morning to determine if gas was used while the system was in shut down mode.

How to pick a welder tips: Stepped voltage or synergic: Synergic MIG’s have the edge when you’re welding stainless & aluminium as they are pre-programmed, easy to set up & portable. They also provide a better weld characteristic and so give cleaner weld bead with less/no spatter. Inverters: Considerably smaller and lighter and so ideal for site work. All inverters are stepless and so have infinite control. Also cheaper to run power wise. Budget: How much welding are you going to undertake? Gear your purchasing decision around the jobs you will be working on the most. Polarity changeover; A lot of welders at the light industrial end will to be able weld with gasless flux cored MIG wire. Is the switchover easy on the machine you’re considering. Availability of spares & after sales service: Ask where the machine is actually made. Even the more recognised brands largely outsource their production, which can lead to quality and after sales issues with lack of continuity of supply for spares.

Angle grinders are formidable tools and need plenty of power to spin cutting or grinding discs at high velocity. Look for corded angle grinders that spin between 11,000-12,000 rpm or cordless angle grinders that spin between 7,500-9,000 rpm. The best angle grinder should be powered by a 700W motor at minimum if corded or, if cordless, an 18V battery that has a capacity of at least 4Ah. The grinding wheel diameter on most angle grinders is usually 115-125 mm, although heavy-duty angle grinders can accommodate grinding tools over twice that size. Noise and vibration levels are important aspects to consider with this type of power tool. Often the best angle grinders are the least noisy with lower vibration levels. This is especially so with cordless versions with brushless motors but they are more expensive, particularly if you include the cost of a battery and charger.

A few tips on welding equipment, MIG and TIG welders, plasma cutters. MIG welders use a wire welding electrode on a spool that is fed automatically at a constant pre-selected speed. The arc, created by an electrical current between the base metal and the wire, melts the wire and joins it with the base, producing a high-strength weld with great appearance and little need for cleaning. MIG welding is clean, easy and can be used on thin or thicker plate metals. Similar to MIG welding, flux-cored arc welding (FCAW)* is a wire-feed process but differs in that self-shielded flux-cored welding does not require a shielding gas. Instead, flux-cored wire is used to shield the arc from contamination. This is a simple, efficient and effective welding approach, especially when welding outdoors, in windy conditions or on dirty materials. The process is widely used in construction because of its high welding speed and portability.

Sturdy Build and Fixed Wheels. The machine is built with precision and sturdiness. It comes with a bamboo duct that can move around freely in any direction. I’ve found alloy rivets with buckle and anti-corrosion features. The handles make it easier to carry the device anywhere you need. Fixed wheels on the bottom of the machine make it a mobile device. DC Brushless Motor and 150 CFM Airflow The KNOKOO welding fume extractor can generate 150 CFM airflow with 110V power. It comes with a shutter outlet for letting the air out. The DC brushless motor ensures thorough purification, and the power-failure protection saves the machine from sudden power failure. 3 Layers of Filter and Versatile Uses The machine comes with 3 layers of filters for efficient fume extraction. I’ve found pre-filter cotton in the first layer that can remove large particles. The second layer can remove dust and tar, and the third layer can remove gas and smoke.

Although this is a regular drill press and not a magnetic drill press, you can also use this one for steel drilling. The motor has a rating of ½ HP and in order to change the drill speed for metal drilling, you have to change the belt and pulley combination setting to the slowest speed. As a drill press, the RIKON 30-120 does not have the best performance. The feeding wheel is not well made and is awkwardly situated. Your chances of getting the back of your fingers caught between the feeding wheel and the belt tensioner are quite high and it is very painful. The packaging of this drill press is poor as well. If you are looking for a tool that you can use for drilling steel exclusively, we recommend that you stick to magnetic drill presses. Regular drill presses can work great for wood, plastics, and steel, but they don’t have magnets and is impossible to use for vertical and overhead applications.

Our vision and our distinct set of values drive the success and spirit of our organization. At ESAB, under Colfax leadership, we live our values. As a premiere U.S. welding equipment manufacturer, our vision and values help us to make strategic decisions, allocate resources, and focus our choices every day, domestically and internationally. ESAB offers a world of products and solutions for virtually every welding and cutting process and application. We serve industries that serve the world. The Best Team Wins – Team-oriented, involved associates are our most valuable resource, and we are passionate about attracting, developing, and retaining the best talent. Living this value is done in three primary ways: 1. Building the right team – having the right people to do the job; 2. Creating the right environment – making sure that leaders create an environment where all associates can contribute, and 3. Getting the win – when you have the right people and right environment – it makes getting the win a lot easier!

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

The Hobart Handler 210 has the typical great quality Hobart build with durable parts that stand the test of time. The 210 is more suited to autobody repair and construction than the 190 and 140 and it welds up to 3/8 inch. It’s also a flexible unit with the capacity to weld off 115V and 230V. At under $1000 it’s lot cheaper than the Ironman 230 and is a wise choice if you’re looking for a welder that packs real power but isn’t the price of the heavy industrial welders. It you’re looking for the all round MIG package for power, versatility, quality and value for money, the Hobart 210 is our top pick. See our full review of the Hobart Handler 210 here.

Gasless welding, which is also called “Gasless” or “No-Gas” welding, is the main convenience of contemporary MIG welders. That means they can make welds either with or without gas. It is possible thanks to the use of a special tubular wire filled with a flux and metal powder called a flux-cored wire. In a nutshell, when a flux-cored wire is used, its components generate a shielding gas under a high temperature that is essential for a high-quality joint. The thermal overload protection is also a useful feature that will switch the unit off automatically if the temperature reaches a certain level. Surely, a MIG welder is not something you will carry every minute. Yet, if a machine is lightweight and fitted with wheels, using it will be much more pleasurable. Finally, pay attention to the kit each tool comes with. Some models include a welding shield, coil, attachment for flux-cored welding, hammer, or brush. So, take these features into account when buying a welder.

UK market pick: Many veteran welders would agree that the greatest advantage that comes from a metal inert gas MIG welder is its speed. The pace of these premium and cheap welders is unmatched when compared to stick welding and TIG welding, both of which can take a bit longer. For this reason, the metal inert gas welder allows for much faster production rates than the other welding processes (which is a reason for their being used so often in mass production).

Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.

Arc welding is used for both repairs and fabrication. An arc welder gives you a solution that joins metals by heating components with an arc. The arc runs between a continuously-fed section of filler metal, which is why many people refer to their car welder or MIG device as a short-circuit transfer system. As reliable and useful as great MIG welders can be, it’s often difficult to buy the best welder for home use or business performance without additional help. There are many different models available on the market today, and each has their diverse selection of features to offer. To ensure that you can make the right decision first-time around, we’ve checked out the latest available MIG welders, to give you a rundown of the best options out there. Find more details on https://www.weldingsuppliesdirect.co.uk/.

Friction welding is a solid-state process that uses, as the name suggests, friction to fuse metals together. Unlike most welding processes, it doesn’t use a welding torch, welding rods or a shielding gas to create welds. The process only uses the heat generated from high rotational, vibrational or lateral contact speeds between two clean metals to create a bond. The metal residue formed during this procedure is removed after the cooling process. The welding equipment used in friction welding is more eco-friendly than other methods as it doesn’t emit harmful welding fumes or release toxins into the atmosphere. Its simplicity makes it a great option for welding drill bits, connection rods, axle tubes and valves.