Electronic parts info aggregation platform information aggregation platform today? In the early CPUs, the chip integration level was very low. The CPU was a single chip. It only integrated an arithmetic unit and a controller. It could only calculate and control. At this time, the internal capacity of the CPU was useless. Memory, the CPU left The memory cannot be calculated. Back then, there was no memory in the CPU because the memory could not be integrated, and others such as the serial port could not be integrated, so there was only a single CPU. If you need to use the serial port, you need to use a serial port controller chip outside the CPU. The PCB traces are connected to the CPU, and then the entire PCB board is composed of the CPU, and these peripheral chips is called a system board. This system board can communicate with another system board. The CPU communicates with another system through its serial port controller. The serial port controller on the board communicates, and functions such as the serial port controller cannot be integrated into the CPU chip. For example, if the LCD is also used here, it is necessary to add an LCD controller chip to the periphery and connect it to the CPU through wiring. A whole board composed of these chips is called a system board. These UART controllers and LCD controllers are called peripherals. Combining them with the CPU on one board is the function implemented by a current K60 chip, but they are integrated into a small chip. The peripherals here refer to the inside of the system board, the peripherals outside the CPU are called peripherals, the CPU is called the internals, and there are only arithmetic units and controllers inside, which are called internals. Discover additional info at dt06-3s-e008.

Easybom is proud to provide a communication bridge to suppliers, purchasers, and engineers. That makes it easier for them to communicate and find each other more easily. “Win-win and mutual-win” is the philosophy that easybom insists on. easybom has the most suppliers, purchasers, and engineers in the world. easybom introduced the latest electronic components to the market. In easybom, you can find anything you want. The goal of easybom is to create a large number of business opportunities for each user in the world by using data analysis in the most convenient way. Easybom, a powerful information aggregation platform for the electronic component industry, help you search the electronic components and supplier prices you want in a fast and easy way.

Insights: The best and most profitable strategy is to gain insights from our unique perspective as a magnificent electronics component search engine. Integrated Experiences: We offer a trusted range of tools to give your customers a better experience with your product or service. Optimized Price: According to each customer’s quotation, accurately evaluate the customer’s purchase and quotation history, and automatically recommend the best pricing for a single part for customers based on multiple factors.

In the past Wi-Fi technology, intercell co-channel interference (Co-Channel Interference,CCI) is another important factor affecting channel capacity. The core of CSMA/CA is to listen before you speak (listen before talk,LBT). The device monitors the wireless channel first and sends data without being occupied. In the case of multi-AP mesh networking (AP,Access Point, wireless access point), the equipment in the cell will listen to the interference signal of the cell adjacent to the same channel, causing the device to mistakenly think that the wireless channel of the cell is being occupied at this time, so stop transmitting. This kind of interference will significantly reduce the network capacity when the network is not optimized or the number of available channels is very small. As shown in the figure below, the four Wi-Fi AP are networked with three channels. However, since there are only three channels available, AP1 and AP2 have to be deployed on the same channel Channel 6, when the signal of AP2 is interference to the user equipment belonging to AP1-Overlapped Basic Service Set (OBSS, overlapping basic service units, which can be understood as overlapping cells with the same frequency).

Then, as demand for cars picks up in the fall of 2020, Toyota Denso Renesa plans to order 28nm semiconductors from TSMC again, but there is no room to produce in-car semiconductors because TSMC lines are occupied by other semiconductors. Although the inventory in the autumn and winter of 2020 exceeded the limit, by 2021, inventory had bottomed out, coupled with the shortage of 28nm semiconductors, cars could not be made. 28nm is the last generation of planar transistors (FinFET from 16 / 14nm to 3D) (2) do not use self-aligned double pattern (SADP) (will use SADP from FinFET) (3) Renesas vertical integration (integrated equipment manufacturer IDM), for example, outsource production to FinFET from this generation. In short, 28nm semiconductors produced by TSMC and other contract factories have a good performance-to-price ratio, so many electronic devices, including automobiles, use this semiconductor. At the invitation of the Japanese government, the TSMC Kumamoto plant, which will begin operation in 2024, will also mainly produce such 28nm semiconductors. See additional details on component of electronic.